PURPL LED Dimmer Phase Cutting and Trimming 230V 5-400W

When purchasing this product you will receive:
- 1x LED Dimmer Phase Cutting and Trimming 230V 5-400W
- 1x Dial and cover plate White

LED built-in dimmer Multi AC 200V-250 Volts, phase cut-off and phase cut (PWM, TRIAC), 400 Watts (max. Load with LED lights up to 400W). Including cover plate of (cream) white color. This rotary dimmer can be used in conjunction with our 230V dimmable LED Lamps. Protected against overvoltage and short circuit. The minimum load is according to the manufacturer 5W.

This dimmer comes with a white dial and cover plate so that it can be neatly integrated into the wall mounting box. The assembly is very simple, screw the cover plate to the built-in box with the supplied screws.

PLEASE NOTE: This dimmer can not be installed in and switching and / or hotel circuit. 

This LED dimmer operates with 99% of the (LED) lamps. Because the type of dimming can be converted with a button, you always have the right dimmer! This dimmer also works with halogen and incandescent bulbs.

The dimmer has three options:

1. Phase cutout (trailing edge) is used with all dimmable 230 volt LED lamps, recessed spots, downlights, etc. Please note that with this type of LED lamp, no 12 or 24 volts of transformer is used! Also because those lamps only i.c.m. A dimmable LED transformer can be dimmed.
2. Phase cutting (leading edge / TRIAC) is used with most LED lights with external 12 or 24 volt transformer / driver, such as 12 Volt spots.

	Technical specifications
	Manufacturer	Egant
	Composition	Basic element
	Operating mode	Rotate / push button
	Mounting method	Recessed
	Method of connection / type of fastening	Screw fastening
	Degree of protection (IP)	IP20
	Nom. (Measurement) voltage from/to	1-270 VA
	Nom. voltage	230V
	Frequency	50 Hz
	Color	White
	Button fastening thread plate fixing	Ø 4 mm 5mm